Posted 3/2/2019: 1st time shopper coupon $3 OFF any order. Coupon Code: NORD3
Shop Now (
See more
See less

SG2100 Problem

  • Filter
  • Time
  • Show
Clear All
new posts

  • SG2100 Problem

    I'm having a problem with my SG2100 Motor. I know it is not the receiver because when I attempt to move the motor manually the green light turns to amber and it will not move and I have to press the button several times to get it to move. Is there anyway to take the front cover off the motor to repair it without loosing my settings? I have it pointed perfectly and can scan from 125W to 30W. I'm not trying to be picky. Just don't want to loose my angle and lattitude setting to repair it. Also anyone on here know what it might be. Might it need a new motor or just the switch in the motor? Thank you for any assistance.
    Last edited by milepost72; 10-26-2012, 10:38 PM.