No quality using Dave dish pointed @ 101

[hans]

I am new to FTA world and could not understand why i cannot hit AMC-4 / KU which is at 101 with my existing Dave dish pointed @ 101. On my 2500A I have changed the freq to 11205 no avail. Tried all Transponders still. Are there any birds I can hit without moving my dish ? Any help will be appreciated.

SPECS:
PANSAT 2500A
I still have my other Dave receiver in other room which is subbed
4X1 DISEQ SWITCH
Dave Dish with Dual LNB pointed @ 101 because of subcription

[avex_vu]

Is dave dish an 18 incher? you need a min 30 inch or higher to get amc4
the bigger the dish the bigger the gain the bigger the signal youll get.

[confederation]

avex vu,
can you show me how, my have pansat 2500a, 33" dish, universal lnbf and the signal i got is 97% but the quality is a big 0
please help

[dtsexpert]

Links below might help
1. Tips & Tricks: http://www.sadoun.com/Sat/Installati...nting-Tips.htm
2. Dish Elevation/Azimuth, lnbf skew, magnetic declination:
http://www.sadoun.com/Sat/Installati...Calculator.htm
Note: You need to use an active transponders when tuning the dish.
Michael

Originally Posted by confederation

avex vu,
can you show me how, my have pansat 2500a, 33" dish, universal lnbf and the signal i got is 97% but the quality is a big 0
please help

[confederation]

dts
yes i did use the calculation sw from the link that you gave but still
also what you mean that use active transponder ??
please help thanks