Help with dish 500 with legacy quad LNB

[hiker]

Dishnet dish 500 with legacy quad LNB (has built-in multiswitch). So...

Which sat's signal is passed thru the internal multiswitch to the meter?

Is there a way to use a dual meter with the quad and see both sats at the same time?

TIA

[bobkat]

What kind of meter are you using? I use a Birdog and it will work through SW21 switches but I've never tried it on a quad DN LNB. When running through the SW21 it locks onto whatever LNB is connected to "Dish 1" input. I don't think analog beeper meters will work through a Legacy Fatboy -- nor do I think a dual meter will work and let you see both sats at the same time. I've never tried so I could be wrong ... :roll:

kat