Tvglobal
11202 v 22000
enjoy!
Fortec 80cm dish, Univ LNB.
Fortec Classic NA
Captiveworks 600S Premium.
C-band 10ft dish, with Echostar 4000 IRD.
I got all other channels such as VT4, SaigonTv, LittleSaigontv, VBS, but I get zero quality on this TP. Can someone help? Thanks
Ahhh, time to do a Power Scan and add this channel to the list, thanks for the heads up
I need to help a buddy of mine to add these new channels in. I see they are on different polarities. Besides climbing up to the dish and turning the knob what else can be done to change polarities?
Thanks.
Mike
all depending on your setup most receivers control the polarity on a lnbf.
Rainman's Equipment
Undien 4600,DSR 922, Fortec Ultra, Satworks 3618, Sathawk pvr 800
2 Fortec Mercury II, Fortec Classic NA, DVB World USB 2104D
8.5' Orbitron polar C Ku dish, 8.5' Birdview HH C Ku dish
100cm Fortec dish, 90cm Fortec dish
2 DG-240 HH motors, Co Rotor II feed horn
Norsat 8515 C band lnb, Norsat 4506A Ku lnb
BSC-621-2 Lnbf, Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf, Fortec Fsku-v universal Lnbf
V-Box, G-box
I Like To Shop at Sadoun Satellite Sales.www.sadoun.com
Hi,
Thank you for the reply. I think the receiver can do the job, it's just that the LNBF might not accept commands from the receiver. I don't have the model number of the LNBF in question, but I know the control is on the LNBF. Twist to the right it's one polarity, twist the other way for the other polarity. I don't know that it accepts the voltage commands.
Besides which after five years it might be time for a newer model LNBF. I see now where one is available. (I say "now" because I found that AFTER I posted my question.) ;-(
Thanks again.
Mike
that must be a real different model everyone that I have seen use's 13v for one polarity and 18v for the other polarity only time you need to turn it is to set the skew for best picture.
There are currently 1 users browsing this thread. (0 members and 1 guests)