Just pay me a flight ticket from Alb, NM. I will help you out. j/k. I wish to live there, so I can help you out. It is so easy with me. Hope you get its to work.
Few things that you need to know before to get the signal.
1. Locate the
installation site, make sure no trees in the front of the dish.
2. Good weather, no snowing or raining :-)
3. Calculate your living location. Good Info here:
How to install an HH-Mount Motor? Applies to DG240-SM3D22-STABHH100-HH120-Motech-SG2100
4. Make sure the pole is level
5. Set your dish elevation angle
6. Brand new cable, LNBF or you make sure your cable and LNBF are still
working fine.
7. If you have a 4X1 switch, don't connect it yet.
8. Place a small TV at your installation site or someone watch your signal
meter inside the house.
8. Make sure turn to transporter that has channels. Check
LyngSat - Lyngemark Satellite for more details on which satellites that you want to
get.
10. Be patience when you turn the dish, little by little.
11. Good Lucks! and Enjoy TV!
Linear Mode
