101w amc4

[ftafan123]

Hello. I am now having my 36in fortec star dish pointing at 97W on a static post using Invacom Cir/Lin Quad LNB QPH-031. Can capture the 101W satellite on the same LNB? Do I need to move my dish or have to use a switch? Thanks.

[Jim-S]

Yes you can use the QPH-031, yes you need to move your dish from 97W to 101W, that would be 4 degrees to the west. You are using the "L" side of the LNB leave it there you do not need a switch.

[ftafan123]

Thanks, Jim-S. Let me try the motor. Since it worked OK without the motor, but when I attached the dish to the motor, I start losing all signals although I tried to set the correct elevation angle on the motor shaft and the dish itself. Still working on it and will update to you. Thanks again for the tip.

[Jim-S]

How to install an HH Mount DiSEqC USALS Motor? Applies to DG280, DG280B, DG380, STAB HH100, HH120, Moteck SG2100 If you haven't viewed this yet please do so.