I have a new twinhandtv sat with
HH100 motor. my lat and long for tupelo ms is 34.2 and 88.5. I have set the motor angle to 34 and the dish elevation to 24. Is this right ?
I have pointed the dish at 180 deg. with motor at zero.
LNB type is set to universal.
I get a signal reading of 40 regardless of where the dish is pointed or if there is cable attached.
also when enter my long and lat in setup and click to go to a sat (amc3)
it says "can not reach satellite from your location".
please help!
Linear Mode
