Currently, I have installed a 80cm dish (with a
STAB HH90 motor), circular KuLNB and Ultra Lifetime IRD. I recently incorporated a 4:1
Diseqc switch along with a LNB extension bracket for a Fortec Linear LNB. Wired the Circular LNB on Diseqc Port #1 and Linear on Port #2. I’m still receiving reception on the circular LNB sat’s but no luck with the Linear LNB sat’s. Are there any tips as to properly setting/configuring LNB on the dish itself. The second LNB (Linear) is mounted right next to the original LNB. Do I need to consider offset angle and/or rotation of Linear LNB?
Linear Mode
