I have been using my Pansat 2500A on my big dish, with near perfect reception. I am now trying to set it up with a Fortec Star 80cm dish, a Fortec Star universal 1 lnb and a H2h dish motor. I have not been able to get any signal. I need information for the setup of lnb type,lo
freq,22khz,and skew setting. I would be thankful for any help. Thanks.
I am trying to setup on AMC3 which is my most true south sat. My motor is a Microyal model #H2H. I have AMC3 programed in on my big dish,which has a standard k lnb, the lo freq is 10750, when I go to universal1 the lo freq is 9750/10600. The pansat manual reads, if required lnb freg is not available select standard and enter freq manually. For USA Ku band l/o: 10750 MHz. With the k band lnb on my big dish the lo freq are either 10750 or 11250, depending on what sat I am on. Are the lo freqs determined by lnb or sat. Thanks.
LO frequencies are determined by the LNB; for your small dish the LO frequency will be 10,600 MHz as Druzey says.
kat
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
Linear Mode
