I just purchased pansat 2500 system with the HH90 motor. The problem is the dish and the motor tube. I can't move the dish upward no more than 23. The motor tube is blocking the dish to move upward.
My dish elevation should be at 38.6 and the motor is 40.(i think)
Is there any other way to use HH90 motor to align the dish angle without moving the dish elevation? Or do i have to get other kind of new dish?
Please help me out with this!
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
What the heck is that? Is it 75 cm? What other markings are on it to help identify it? Some dishes cannot work with motors unless an adapter is used. Remember that the elevation you need for the dish is not the elevation for your location. There is a formula to calculate the elevations for motorized dishes -- its in the Installation section of the Sadoun website.
kat
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
Linear Mode
