I haven't been able to configure my Fortec 786 NA to switch a Pansat DiSEqC. I've set antenna 1 up as C band DiSEqC 1, antenna 2 as Ku DiSEqC 2. There is no signal through the switch. LNBs work if connected directly to the receiver without the switch.
Thanks,
Wayne
Make sure your LNBF Type is configured correctly.
Make sure the LNBF power is V/H for both antennas
Make sure you are using an active transponder freq in TP data
If you get GREEN bars for both STRENGTH & QUALITY, please click on START and search the satellite.
__________________ Best regards, Sadoun Satellite Sales US Sales info: 1-888-519-9595 or, 1-614-529-9560 ____________________________________
.png){kind=avatar}
Linear Mode
