Pansat Twin LNBF

[pictureon]

Hello: I'm trying to install a fortec star system with pansat PT5500 twin LNBF to operat 2 receivers and one dish. The problem is that I do not know what lnb setting I have to enter into the receiver. Is this a universal LNBF. I tried to put the frequencies that typed on the box but I got no signal. The receiver did work with a fortec star universal LNBF (single output)
LNBF Pansat PT5500
Inut: 11.7-12.2 GHZ
Output 950-1450Mhz.


Please help. Thank you

[bobkat]

Did you set the local oscillator (L.O.) frequency to 10,600 MHz?

kat

[Admin]

The Pansat LNBF you have is a STANDARD type.

If you have an ULTRA system, set the LNBF type to STANDARD and the LO freq to 10750

If you have a 786 system, set the LNBF type to SINGLE. Click OK on SINGLE. Set the LO Freq to 10750 and click on STORE.

Good luck and enjoy your new system.

[pictureon]

Thank You It did work. It was a standard LNBF with a LO of 10750.
It would be nice if they say that on the box.

Thank you It worked!

[Sadoun]

Glad we were able to help. Yes, I agree with you it should say that on the box. The manufacturer missed that, but we have listed it on our website. See #2 here: http://sadoun.com/Sat/Order/LNBFs.htm