9xxx Frequency Range

[BrianC]

Following is my current setup followed by my question:

Satworks 3688
Standard Ku LNB
LNB Freq Setting: 10750Mhz
31" Dish with SG2100 Motor

The question I have is when I do a blind search and the receiver locates new transponders, it lists frequencies in the 9xxxMhz range although lyngsat does not list anything in this range.
For example, a news feed I found on T6 shows up as 9451Mhz but the actual freq. is somewhere in the 12xxxMhz range. If I directly input the 12xxxMhz freq I can pull up the transponder just fine so I'm clueless as to why it displays in this range.
The hardware seems to be operating fine so I'm not leaning toward a hardware problem. I'm sure someone has an answer and maybe a fix?


Thank you.

-Brian

[BrianC]

any ideas on this problem anyone?

[BrianC]

I found out why it was doing this.
It was a bug in the firmware.
I found firmware at another site, reflashed it and all is working
great now.
Just so everyone knows, the Satworks 3688 firmware has had a lot of updates over the past few months. A new version was actually released yesterday so you should upgrade it.
It is easy to do with a PC and a special program plus a standard serial cable.

If you need further info just ask.

-Brian