Currently, there are no FTA DVB channels on this bird. If you are still interested in getting lock on G4R, you can use the "DirectWay" transponders to tune the dish. The receiver won't scan anything in since these transponers are data (internet) http://www.lyngsat.com/g4r.shtml
Michael
Quote:
Originally Posted by flybird74
Hi, could someone point out a good freq. to use to pin point G4R? Thanks.
Michael, I got some PBS channels from AMC3, the picture was OK but there was no sound. Is there anyway I can get sound from these channels? They are on 12110 H
PBS channels on AMC3 use AC3 format. You need a receiver which is AC3
compatible to output the AC3 stream, then use an AC3 receiver/ decoder to decode it. Fortec Lifetime and Ultra can output the AC3 stream.
Michael
Quote:
Originally Posted by flybird74
Michael, I got some PBS channels from AMC3, the picture was OK but there was no sound. Is there anyway I can get sound from these channels? They are on 12110 H
Michael, i asssume that the ac3 audio was not decoded by the receiver, but the signals are still passed to the TV, right? So if the TV has ac3 decoder, then sound should come out, true?
That's correct. The receiver output the raw AC3 stream. If your TV has AC3 decoder built-in, you are all set.
Michael
Quote:
Originally Posted by flybird74
Michael, i asssume that the ac3 audio was not decoded by the receiver, but the signals are still passed to the TV, right? So if the TV has ac3 decoder, then sound should come out, true?
Linear Mode
