Sure. As long as its not a circular LNB.
kat
Can i use a eagle aspen LNB on a 90cm dish FC90U to work on G10 @123w
Sure. As long as its not a circular LNB.
kat
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
eagle aspen is a cband lnb
http://www.sadoun.com/Sat/Products/E...-Band-LNBF.htmOriginally Posted by bobkat
and, as long as it's a Ku band LNB for G10R/Ku.
You might have to do some fabrication to mount it.
i have a ku lnb now on it and its been working good for about 1 yr now but i was looking into getting these freq
3795-4180 on galaxy 10
I understand that they are cband so the question is will this lnb work with a fortec 90cm dish or will i also need a cband dish
Eagle Aspen makes tons of different LNBs... from C-band up to DTH stuff. That's why I mentioned circular -- you didn't specify what you had. Your C-band LNB won't pick up any C-band signals on a 90 cm. dish.Originally Posted by lasko
kat
thanks so i must step up to a cband dish thanks again budOriginally Posted by bobkat
Just had to laugh a bit to myself. I currently run a 8.5' mesh dish and consider that small for C Band. I have always thought of 10' as the bare minimum. 90cm? Would not even enter a thought. Isn't that the size of the small reflector on the front of some dishes that have the lnb mounted in the center of the actual dish? LMAO.
I will say this much the guys doing it with 120cm have amazed me but am really curious as to what they really do get with a dish that small.
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
There are currently 1 users browsing this thread. (0 members and 1 guests)