Super Buddy meter is compatible with the DIRECTV SWM-5 and SWM-8

[Sadoun]

The Super Buddy meter is compatible with the DIRECTV SWM-5 and SWM-8 modules that are used in DIRECTV MFH-2 hi-rise/multi-dwelling unit installations, and is compatible with the new DIRECTV SWM-ODU (SWM integrated into the LNB on the antenna that looks just like the Slimline).

Just FYI – We will start shipping a revised version of the Super Buddy that comes standard with a USB PC connection (instead of the previous 9 pin serial) and has a higher current limit level of 750 mA (the previous current limit level now was 625 mA). Our next shipment of meters will include these revisions.

We’re also just beginning to offer, as a $20 List Price option, a built-in 21V module to power the new DIRECTV SWM-ODU from the meter before the installer ever runs the cords for the power inserter.

For the old Super Buddy meters out there now, we offer an accessory called the SWiM Kick 21 for List Price $79 that screws on the top of the Super Buddy to allow the tech to power the DIRECTV SWM-ODU from the meter.

-------------------------------------------------------------------------------

DIRECTV SWM-ODU notes
DIRECTV has indicated that the new DIRECTV SWM-ODU requires 21 Volts to power it.

Option 1: Power the SWM-ODU with the power inserter
With many satellite meters on the market, the installer must use the power inserter to power the LNB and then a Splitter leading to the meter to read the signal from the SWM-ODU.

a.) For basic peaking meters (i.e. Sat Buddy, Sat Buddy 2, or Dual Buddy), an ASL (Alignment Signal Locator) is required to be used during the peaking process to ensure that the 101° and 119° satellites are located and peaked for maximum signal strength. The SWM integrated LNB is connected to the ASL (SWM IN port). This connection then allows the 101° and 119° satellite locations to be split into separate unique signals as seen below.

b.) According to DIRECTV, if an ASL is not available then a single port power passing two way splitter (rated @ 2MHz - 2150MHz) can ONLY be used with the BirDog and Super Buddy meters.

Note: The SWM Integrated LNB output port must be connected to the input port of the Splitter

Option 2: Power the SWM-ODU from the satellite meter before ever running the power inserter cables
The normal Super Buddy meter has a maximum voltage output of 18V, so we have come up with two solutions to make the tech’s job faster and easier:

1) For existing Super Buddy meter owners, they can purchase the accessory model SWiM Kick 21 that attaches between the top of the Super Buddy meter and the SWM LNB and up-converts the voltage from 18V to 21V.

2) For people purchasing new Super Buddy units (that will ship November 5th, 2008) , they can choose to add an option at the time of order for a built-in 21V module. To ensure this option is installed during production, the customer should order Part Number Super Buddy 21.

Meter Setup for new DIRECTV SWM-ODU:
Region: Your geographic region
Service: DIRECTV
System: SWM-ODU
LNB Model: (N/A)
Switch Type: Manual


Pricing for both models of Super Buddy meter discussed:

~ Model Super Buddy Satellite Meter
Part Number (for ordering purposes): Super Buddy
List Price: $699

~ Model Super Buddy Satellite Meter with built-in 21V module for powering DIRECTV SWM-ODU
Part Number (for ordering purposes): Super Buddy 21
List Price: $729

~ Pricing for model SWiM Kick 21 Voltage Step Up Device (accessory for the Super Buddy satellite meter):

Model SWiM Kick 21 Voltage Step Up Device
Part Number (for ordering purposes): SWiM Kick 21
List Price: $79
--------------------------------------------------------------------------------------------

Meter Setup for DIRECTV SWM-5 or SWM-8 modules:
Region: Your geographic region
Service: DIRECTV
System: MFH-2 SWM
LNB Model: choose either SWM-5 or SWM-8, depending on hardware used
Switch Type: none

----------------------------------------------------------------------------------------

Don’t hesitate to contact us if you have any other questions or need anything else.

[SatLuv]

I have talked to installers who use the Super Buddy and they love it.

[Invodyattarty]

Ever wanted to create your own CDs, DVDs or USB Flash drives that automatically launch a fancy menu when it is placed into the drive, the way commercial software CDs/DVDs do? The facility to automatically run a program, be it a CD menu, DVD menu, installer, or otherwise, is known on Windows systems as AutoRun. Related to this is AutoPlay, where the system automatically plays a particular media file, such as video or a music CD, etc. The free software on this page allow you to easily create a CD menu, DVD menu or the like for your media, so that it automatically displays a menu for your users to select a program to install, read a manual, browse the CD, or even display a list of songs or video to play.


auto play menu creator - free

CD-Menu Creator can create a professional-looking CD menu and DVD menu
SamLogic CD-Menu Creator 2010 is an easy-to-use tool that you can use to create professional-looking autoplay / autorun CD menu and DVD menu interfaces. From a menu you can launch applications, start Installation programs, open documents, play movies, play Flash animations, open Internet pages etc. The menu is automatically opened when the user inserts the CD/DVD in a drive. A CD menu and DVD menu can contain pictures, animations, movies, sound, music and more.