need help hh120 set up

bundo · #1 (**permalink**) 03-13-2006, 07:22 AM

hello all, (i have 90cm fortecstar dish uneversal lnb,stab HH120) my zipcode is 07630 can some one tell me whats my true south and setting numbers for the dish and the motor thank you

bundo · #2 (**permalink**) 03-13-2006, 08:13 AM

can someone help me?

rainman · #3 (**permalink**) 03-13-2006, 08:17 AM

check

HTML Code:

www.sadoun.com

under installation should answer most of you questions.then come back here with questions not answer.

Sadoun · #4 (**permalink**) 03-13-2006, 09:25 AM

Here is some reading material for ya:
http://sadoun.com/Sat/Installation/H...stallation.htm

Dug · #5 (**permalink**) 03-13-2006, 10:17 AM

Bundo, your zip code comes back as "Emerson NJ". It shows your Latitude as 40.9739 and Longitude as 74.0268. Also try this thread http://www.sadoun.net/forums/showthr...4682#post24682 it should help.

bundo · #6 (**permalink**) 03-13-2006, 03:38 PM

need to know what number i set the hh120 motor and what number i set my dish at and what would be my true south from zipcode 07630 on a plumb pole thankyou

starman · #7 (**permalink**) 03-13-2006, 04:45 PM

Your zip code 07630 gives you co-oridnates of roughly 40N 74W. so set the hh120 to your latitude(40) and your TS satellite is always the one that is located at your longitude number. If you look at Lyngsat you will see that SBS6 is at your longitude of 74 so that is your true south satellite. The Ohio News Network is on that bird, 11741 horizontal, SR 6616. Set those values in your receiver, swing the whole assembly, dish/motor on the pole until you think you are close to true south and start searching for quality.