Disk elevation ???

whitecobra · #1 (**permalink**) 10-02-2005, 07:11 PM

Fortec Star 100 cm dish w/offset angle of 24.6. HH120 set at my latitude 35.5 . In the HH120 instruction manual , under #5 How to find out the elevation of the dish, the forumla of: Degrees of disk elevation = P - (60 - latitude) so 24.6 - (60 - 35.5) or 24.6 - (24.5) = 0.1. Should dish be set at 0 and be level or at 24.6 and be pointing up? Motor is at 0, pointing south and set to my latitude on elevation.

DruzeTito · #2 (**permalink**) 10-02-2005, 07:19 PM

set dish at 24 degrees on the elevation scale.. disregard the dish's offset angle. its not needed.

whitecobra · #3 (**permalink**) 10-02-2005, 07:25 PM

I have a universial 0.4 db single KU LMBF FSKUv. Is that a circular lmb or a liniar lmb.

DruzeTito · #4 (**permalink**) 10-02-2005, 08:17 PM

linear