hh100 motor seems to be weak. it gets to the west position and it sits there it won't come back to east unless you help it back any suggestions on what might cause this? i have checked voltage to motor 13.96,
continuity is fine ,also check with another receiver.this is the second hh100 motor they have sent me. it is a 90cm fortecstar with a invacom quad lnb?this is a brand new setup what eles can i check or do
If the motor is going too far west. The dish mightl become too heavy for the motor to move. Try to set west limit so motor wont move too far. Another reason could be heavy lnb's.
Linear Mode
