DiSEqC Switch that is compatible with HH90 motor and Fortec

[fta-fan]

Hi,

I used a Pansat DiSEqC Switch and SG2100 motor with my Fortec Lifetime receiver. They worked. I have to replace the SG2100 with a HH90 motor because the SG2100 became unstable recently.

After installing the HH90 motor, I found that the Pansat DiSEqC Switch is not compatible with the HH90 motor.

Could someone tell me what DiSEqC Switch is compatible with the HH90 motor?

Thanks in advance!

[Sadoun]

Make sure the DiSEqC switch is installed after the motor between the motor and the LNBF. Try that and let us know.

[fta-fan]

Thanks for the quick help! The switch is between the motor and the LNBF. Everything worked before. I only changed the motor from SG2100 to HH90. The connection is exactly the same as before.

Originally Posted by Sadoun

Make sure the DiSEqC switch is installed after the motor between the motor and the LNBF. Try that and let us know.

[Admin]

What receiver do you have?

[fta-fan]

Receiver: Fortec Liifetime (not Ultra).

[fta-fan]

Hi, Sadoun,

Could you recommend a Diseqc switch that works with a HH90 motor and a Fortec Lifetime receiver? If you have a switch that you have confirmed to work in the above setup, I'd like to buy one from you. Thanks!

[Admin]

Check item # 2 here: http://sadoun.com/Sat/Order/Switches.htm

[teecookie]

I have a mulity dish setup. One dish picking up 110 + 119. Another dish picking up 97.I just recently purchasted Stab hh What is the best place to put the switch? Should the diseqc switch be place between the LNB and motor or after the motor?