new to dish motors

DJBio · #1 (**permalink**) 02-09-2008, 10:43 PM

Hi guys and gals i am new to the hole dish motor setup
i have a stabb hh90 motor and a 39" fta dish to go with my Coolsat 7000 PVR stb
Any of the sites i go to tell me to point my dish at 61.5 cause that the the due south bird i need to point at but i was told that i would need a bigger dish but i am not looking for anything off that sat seeing that its one of dishnet works but i am goin to use of my old dss lnb's till i can buy a QPH-031
any help would be great
i was on lyngsat to see what i could get with a old dss lnb looks like a lot of channels

rainman · #2 (**permalink**) 02-09-2008, 11:18 PM

Quote:

Originally Posted by DJBio

Hi guys and gals i am new to the hole dish motor setup
i have a stabb hh90 motor and a 39" fta dish to go with my Coolsat 7000 PVR stb
Any of the sites i go to tell me to point my dish at 61.5 cause that the the due south bird i need to point at but i was told that i would need a bigger dish but i am not looking for anything off that sat seeing that its one of dishnet works but i am goin to use of my old dss lnb's till i can buy a QPH-031
any help would be great
i was on lyngsat to see what i could get with a old dss lnb looks like a lot of channels

the 39" dish should be plenty big enough. the motor may be a little small for the dish though.

DJBio · #3 (**permalink**) 02-10-2008, 10:13 AM

i forgot to tell yas i am in eastern canada, where i got the dish and motor i asked ne of them if the dish is to big for the motor and he said it would be ok
if anyone could help me out with some # on where to set the motor at that would be great

rainman · #4 (**permalink**) 02-10-2008, 02:57 PM

you set the motor on the latitude scale to your latitude then aim at your true south sat which would be the one located closest to your longitude.

DJBio · #5 (**permalink**) 02-10-2008, 03:48 PM

where do you get ur # from or where would i beable to get mine
use a compass maybe

rainman · #6 (**permalink**) 02-11-2008, 04:25 PM

Quote:

Originally Posted by DJBio

where do you get ur # from or where would i beable to get mine
use a compass maybe

check out this page should explain some of your queations.

How to install an HH-Mount Motor? Applies to DG240-SM3D22-STABHH100-HH120-Motech-SG2100