Sadoun Tech Forums

 Save! Satellite Packages

  Latest Satellite Receivers

C & KU  Dishes & Mounts

 

Go Back   Sadoun Tech Forums > System Installation > Signal Meters
Register
Home Register FAQ Members List Members World Map Calendar Arcade Search Today's Posts Mark Forums Read

Signal Meters All you want to know about satellite signal meters and their uses.

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 11-25-2003, 08:26 PM
Kegler Kegler is offline
Junior Member
Newbie
 
Join Date: Nov 2003
Posts: 2
Rep Power: 0
Kegler is on a distinguished road
need help with finding sat 119

I have a strong signal (between 77-85) on sats 101 and 109 but 0 on 119. I started out with azimuth set for 221, elevation set to 35 and tilt 64.5 as recommended for my area (Sylvania,Ohio). I recently purchased a SF95 signal meter and tried to use that but I still still can't get anything off 119. I have tried to adjust the tilt, elevation and azimuth but to no avail. Before I tried to adjust it using the signal meter I was getting signal strength of low to mid 70's on 101 and 109 and about 37 on 119 now I get nothing on 119. Do I need to use a different signal meter for multiple satellites or is there a way to differentiate what signal the meter is picking up? Or is there a certain procedure that I need to follow to adjust this in. Thanks in advance.
Reply With Quote
  #2 (permalink)  
Old 01-11-2004, 11:35 PM
cdnsat cdnsat is offline
Junior Member
Newbie
 
Join Date: Jan 2004
Location: CA
Posts: 2
Rep Power: 0
cdnsat is on a distinguished road
Make sure that the pole is perfectly verticle (straight up) before you do any alignment in these kind of dish.
Reply With Quote
  #3 (permalink)  
Old 04-10-2004, 12:32 PM
frankxiv frankxiv is offline
Junior Member
Newbie
 
Join Date: Apr 2004
Posts: 6
Rep Power: 0
frankxiv is on a distinguished road
Re: need help with finding sat 119

Quote:
Originally Posted by Kegler
I have a strong signal (between 77-85) on sats 101 and 109 but 0 on 119. I started out with azimuth set for 221, elevation set to 35 and tilt 64.5 as recommended for my area (Sylvania,Ohio). I recently purchased a SF95 signal meter and tried to use that but I still still can't get anything off 119. I have tried to adjust the tilt, elevation and azimuth but to no avail. Before I tried to adjust it using the signal meter I was getting signal strength of low to mid 70's on 101 and 109 and about 37 on 119 now I get nothing on 119. Do I need to use a different signal meter for multiple satellites or is there a way to differentiate what signal the meter is picking up? Or is there a certain procedure that I need to follow to adjust this in. Thanks in advance.
If you have your tilt and elevation set correctly and make your azimuth adjustment and fine tune to get the strongest signal strength on 101 then you should get the other signals...........as long as you have line of site to 119. The elevation of 119 is a smaller angle than 101 so trees/buildings that don't block 101 can very well block 119.

Later, Frank
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -4. The time now is 11:08 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.0.0 RC6
Copyright , Sadoun.com