SatHawk can not find [U] telestar 5 on the list

vietsatt · #1 (**permalink**) 07-03-2005, 12:49 AM

HI
I just bought the SatHawk 3000 one week ago from Sadoun, they said it should have newer firmware in it and it would work with universal lnbf. when I turn on it said software version 5.1.3 and Sathawk. TV A3.0... I went through the list by hold mode and push up button, I can not find the [u] IA5 or [u] telestar 5 - 97w on the list. only the Telestar 5 which is not support the universal LNBF that I have in the list. Can any one please help me how to make my Sathawk 3000 work with universal lnbf ..
thanks for any help

Admin · #2 (**permalink**) 07-05-2005, 10:40 AM

IA5 should be listed

If you can't find it, try to upload the datafile again. the instructions are here: http://sathawk.tv/Downloads.htm

vietsatt · #3 (**permalink**) 07-05-2005, 06:37 PM

Dear
IA5 is there but [u] IA5 is not there

Admin · #4 (**permalink**) 07-05-2005, 10:16 PM

Actually, [u]KV and [u]KH for IA5 are also there. When you reach IA5, by clicking on the MODE and Down Arrow Button, release the MODE button, then click on the Up/Down arrow buttons to scroll between all the options for IA5.