C band antena

[guinellal]

I just bought an actuator arm from Sadoun. Please explain me how to switch this arm to the the other side. Other words: I want to move my antenna from East to West. I would like to get the other lower satellites like "Hispasat". If you could send me pictures. Thanks in advance.

[BYX]

Originally Posted by guinellal

I just bought an actuator arm from Sadoun. Please explain me how to switch this arm to the the other side. Other words: I want to move my antenna from East to West. I would like to get the other lower satellites like "Hispasat". If you could send me pictures. Thanks in advance.

First of all to be able to help you we would like to know your location and type of antenna, lnb and receiver you are working with.
Provide as much information as you can an we will gladly respond to the best of our knowledge.

[guinellal]

I have BSc621-2 and I am in Ontario, Canada. I don't have any problems with this Lnbf. All I want is to know how to swith the arm. Thanks.

[rainman]

Originally Posted by guinellal

I have BSc621-2 and I am in Ontario, Canada. I don't have any problems with this Lnbf. All I want is to know how to swith the arm. Thanks.

it all depends on what type of dish and mount is on the dish if you could post some pictures of your dish someone should be able to help you.

[guinellal]

It is the most common 10" mesh antenna. Just give an idea. Thanks.

[guinellal]

Correction: (10' mesh antenna)

[lumpkin666]

Well since you can't tell us what exactly you're using, and haven't posted any pictures, I'll assume it's just like any of my BUDS.

Take the bolt out of the top of the actuator where it connects to the dish
Take the bolt out of the bracket that attached the actuator to the connection to the pole.
Flip the actuator over and point it the opposite direction (east vs west) and reconnect the two bolts in the appropriately supplied holes on your dish.

[guinellal]

Thanks for your help