Compatile Dish for SM3D22

spike100 · #1 (**permalink**) 03-02-2008, 09:40 PM

Hello, Is DishPro+ dish w/ dual LNB(s) is compatible with SM3D22 motor? I recently bought this motor from Sadoun thought dishPro+ dish wought perfectly fit sincel it had dual LNB. However, while setting the motor arm on the dish noticed it does not fit on there. Any idea/comments is appreciated.

rainman · #2 (**permalink**) 03-02-2008, 10:59 PM

Quote:

Originally Posted by spike100

Hello, Is DishPro+ dish w/ dual LNB(s) is compatible with SM3D22 motor? I recently bought this motor from Sadoun thought dishPro+ dish wought perfectly fit sincel it had dual LNB. However, while setting the motor arm on the dish noticed it does not fit on there. Any idea/comments is appreciated.

the Dish Pro Plus is meant to be a stationary dish.

spike100 · #3 (**permalink**) 03-03-2008, 08:53 AM

So, what brand of dish/LNBF can be used here? Do I need to buy both dish and LNBF? OR just buy a compatible dish and use the existing LNBF. Then the question will the LNBF will be fit the dish LNBF holder. If I will have to buy the LNBF as well what is the dual compatible LNBF for this SM3D22 motor?
Thanks!

rainman · #4 (**permalink**) 03-03-2008, 10:02 AM

Quote:

Originally Posted by spike100

So, what brand of dish/LNBF can be used here? Do I need to buy both dish and LNBF? OR just buy a compatible dish and use the existing LNBF. Then the question will the LNBF will be fit the dish LNBF holder. If I will have to buy the LNBF as well what is the dual compatible LNBF for this SM3D22 motor?
Thanks!

the way this motor works is with a 31" dish or larger would recommend a 36" dish and a 2 lnbf's mounted on one dish. see this page for more info.

SaTracer 3SW NEW Satcontrol HH Motor Mount DisEqC 1.2 GOTO X Sm3d22

spike100 · #5 (**permalink**) 03-03-2008, 02:54 PM

Quote:

Originally Posted by rainman

the way this motor works is with a 31" dish or larger would recommend a 36" dish and a 2 lnbf's mounted on one dish. see this page for more info.

SaTracer 3SW NEW Satcontrol HH Motor Mount DisEqC 1.2 GOTO X Sm3d22

I have been read these information in the above link, but there is no information about specific/recommendation aobut LNBF. Should any LNBF work w/ this mortor, or you have to buy speciifc LNBF?
Thanks!

rainman · #6 (**permalink**) 03-03-2008, 04:14 PM

Quote:

Originally Posted by spike100

I have been read these information in the above link, but there is no information about specific/recommendation aobut LNBF. Should any LNBF work w/ this mortor, or you have to buy speciifc LNBF?
Thanks!

any lnbf should work.

spike100 · #7 (**permalink**) 03-04-2008, 11:13 AM

Quote:

Originally Posted by rainman

any lnbf should work.

Will DishPro LNB that marked 110/119 will work for other birds like Galaxy 5 / AMC 16? I know most of the signal in the US birds are circular. In theory LNBF with same

spike100 · #8 (**permalink**) 03-04-2008, 11:16 AM

Quote:

Originally Posted by spike100

Will DishPro LNB that marked 110/119 will work for other birds like Galaxy 5 / AMC 16? I know most of the signal in the US birds are circular. In theory LNBF with same

Sorry for premature entry...

Will DishPro LNB that marked 110/119 will work for other birds like Galaxy 5 / AMC 16? I know most of the signal in the US birds are circular. In theory LNBF capable of geting one type of signal should be able to get same type of signal from any bird, but I am sure.

Thanks!

rainman · #9 (**permalink**) 03-04-2008, 11:18 AM

Quote:

Originally Posted by spike100

Will DishPro LNB that marked 110/119 will work for other birds like Galaxy 5 / AMC 16? I know most of the signal in the US birds are circular. In theory LNBF with same

no Dish use a circular lnbf while most of the other sats such as Galaxy 5 and 16 use a linear lnbf different freq range.