DiSEqC Compatible MOTOR

Sadoun PowerTech DG380
The best heavy duty motor on the market today!
$99.00
Ordering Information Here
Proven to be Toughest Motor in its class.
Advantages over other motor brands and models:

  • Metal Mounts & Gears Box Inside (others use plastic)
  • Only motor with Automatic Zero Backlash (Slack) Adjustment
  • True handling of up to 120 cm Steel dish (Max 31lbs).
  • High 0.1 degree precision resolution (others have a 0.3 or more. The lower the number the better)
  • Widest +/- 80° Azimuth Rotation angle (others travel up to +/- 75)
  • Bigger 55MM (2.16") Shaft
  • DiSEqC 1.2, 1.3, USALS or "Goto X"
  • All Stainless Steel U-Bolt mounting screws (others use galvanized metal screws)
  • Heavy duty construction & precise technology.
  • Software Limit Protection
This is one of the best motors in its class. Brand new design and full of features.
With a motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt. Good for any offset dish with a U-bolt. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable is needed for installation.
Note: This motor comes with a 55mm (2.16") shaft to fit dishes with U-Bolts. If your dish has a Pole mount bracket with 42mm (1 5/8") diameter, then you will need to order the DG380B model or the 42mm shaft below.
FEATURE:

  • Special design for any receiver with DiSEqC 1.2 & USALS control
  • Does NOT require a receiver with built-in Positioner.
  • Only one Coaxial Cable control
  • Go to X function
  • High efficiency
  • Compact structure
  • Ultra low noise
  • Metal Main Gear
  • Adjustable hardware limits
  • Easy installation with LED Indicator
  • Manual EAST / WEST buttons
  • Mounts on Pole Size up to 2.5"
  • Shaft Size: 2.16" (55mm) shaft diameter to fit large dishes with U-Bolts
  • Optional Shaft Size: 1 5/8" (42mm) Shaft to Fit smaller dishes with Pole-Bolt brackets.
Protocol DiSEqC 1.2 & Goto “X”
Compatible Receiver DiSEqC 1.2, USALS or Interface Box
Antenna Size 120 cm Max (31 lbs)
(for motors sold after 1/1/09)
Speed 1.9° / sec (at 13V) ; 2.5° / sec (at 18V)
Azimuth Angle 80° East ~ 80° West ( 160° )
Elevation Angle 25~75°
Input Voltage 13 / 18Vdc
Output Voltage 13 / 18Vdc
Power Consumption 50 mA (Standby)
200mA (Normal)
350mA (Max.)
Satellite Positions 60 positions
Calibration Function Yes ( Go to 0°)
Manual East/West Buttons Yes (Build-in on the bottom of the Mount)
Limit Protection 1.Fixed type with micro switches
2.Programmable Software Limit
3.Current Limit
Positioning Sensor High Resolution Hall Effect Sensor
Connector F-Type
Weight ( Mount ) 3.1 Kg (Net) / 3.5 Kg (Gross) (~ 8 lbs)
Dimension ( Mount ) 345 x 168 x 110 mm3 (Gross)
DiSEqC is a TM of Eutelsat