In Stock: Sadoun PowerTech DG380 HH Motor

[Sadoun]

Hi guys,

We are happy to announce that the Sadoun PowerTech DG380 HH Motor is now in stock and shipping:

http://sadoun.com/Sat/Products/Power...4%29_small.jpg

NEW Model Sadoun PowerTech DG380

• Metal Mounts & Gears Box Inside
• Automatic Zero Backlash (Slack) Adjustment
• For up to 100 cm Steel dish (Max 31lbs).
• Heavy duty construction & precise technology.
• 0.1 degree precision resolution
• +/- 80° Azimuth Rotation angle.
• DiSEqC 1.2, 1.3, USALS or "Goto X"
• Stainless Steel U-Bolt mounting screws
• Software Limit Protection

[jcarat]

The spec for the DG-380 is "For up to 120 cm Steel dish (Max 37lbs)." but this is a steel dish, could you tell me if the DG-380 can handle a 4.5 or 5.5 aluminum dish? I could weight the dish and ensure that meets the 37lbs limit, but maybe you can tell me from your experience.

[el bandido]

Why have the specs been changed for the DG380? I bought this motor to turn a 1.2 meter dish. At the time of purchase, it was rated at 120CM. Now it is rated at 100CM. What happened to cause this change? Thanks. El Bandido



You have tried the rest, now try the BEST

Sadoun PowerTech DG380

• Metal Mounts & Gears Box Inside
• Automatic Zero Backlash (Slack) Adjustment
• For up to 100 cm Steel dish (Max 31lbs).
• Heavy duty construction & precise technology.
• 0.1 degree precision resolution
• +/- 80° Azimuth Rotation angle.
• DiSEqC 1.2, 1.3, USALS or "Goto X"
• Stainless Steel U-Bolt mounting screws
• Software Limit Protection

[el bandido]

We try support your products. Attached is a review of the DG380 that has been posted on the Internet.
Now, what are we supposed to tell people about your products? Changing the specifications on a motor without an explanation is not a good idea.The customers deserve an explanation.
Thanks.
El Bandido

[Sadoun]

Hi There

I received a couple of question from people who have the DG380 on a 120cm dish with a QPH031 LNBF. They have indicated that the motor struggles to come back up from the West or East with this configuration. We changed the specs to be on the safe side until we do more testing to verify if it is a weight issue or a motor issue.

[Sadoun]

Originally Posted by el bandido

We try support your products. Attached is a review of the DG380 that has been posted on the Internet.

El Bandido, very nice review. Thanks

See my explanation above. For most of the people who both the DG380 they are satisfied with its performance.

BTW, from all the motors we have sold so far, the Sadoun PowerTech line have performed the best.

Stay tuned, I think the DG380 will become a star motor for many years to come. I really like the built-in Automatic backlash adjustment. No other motor has that.

[el bandido]

Sadoun, thanks for the reply and explanation. It is good to get a honest answer. If we did not think you guys had good products, we would not purchase or support them. Good Afternoon. El Bandido