Enter to win: Sadoun Digipower SG2100 HH Motor - End 11/30/2008

[scarrygary2]

I am new to Fta and as a technology lover am excited to step up to the next level and try a motor. I am really hiped to see what the sky of satellites has to offer for free fta tv. If my budgit could afford this I would be there. Gary

[gramps54]

A motorized dish is the (for me) cheapest, and easiest way to enjoy all that there is to be seen from around the world.

[d4st]

I have a fta with a stab motor it is great.I could use a new motor.thanks d4st

[Pat54]

DXing the Clarke Belt.....you never know where that new signal will come from. Do it all with just one dish

[Powrline]

Why is it a good idea to use an HH motor on your FTA Dish?

Here at my residence at -79.4 Deg West, I can scan from 30 Deg, to 129 Deg. which includes about 20 + Satellites. That is only the Ku Band which is all that I am set up to receive.

If I were set up to receive C-Band also, I would more than triple my TV [FTA] reception.

When I was considering my purchase of FTA equipment, An HH motor was a must, and it still is.

Thanks
Bill

[thng]

Why use an HH motor on your FTA Dish?
No way I'm going on the roof in the middle of January.

[johnhenry]

why in your opinion it is a GOOD idea for someone to use an HH motor on their FTA dish

motor will allow u to pick up all feeds from around 70 degree each direction from your location with the lnb type u have , linear lnb wild feeds galore


__________________________________________________ _________
Uniden supra
10ft fiberglass Oribitron dish
Viewsat ultra
Pansat 2700
Superdish 3 sat location fixed dish
Dish 300 dish

[rainman]

one word explains it VARIETY.

[squeegee_me]

Reply to THIS message and write why in your opinion it is a GOOD idea for someone to use an HH motor on their FTA dish.

I'd say that using an HH motor is a good idea because once installed, you don't need to go outside in the rain or snow to move your dish anymore.

Squeegee_me

[sh3139]

Reply to THIS message and write why in your opinion it is a GOOD idea for someone to use an HH motor on their FTA dish.

Cus it too hard to send SO out to manually align dish....