Motech H180 HH Motor Blowout Sale

[Sadoun]

Moteck H180 Motor

$99.95
While Supplies Last
(Regular price $149.95)

Use this motor to motorize your C-Band dish (up to 6 ft) to move from east to west to track the satellites positioned along the Clarke belt.

FEATURE:

• Require a receiver with built-in Positioner or you can use the DiSEqC positioner to control this motor.
• Works with VBOX II & V3000 (GBOX) positioners.
  
• Good for prime focus or offset dishes up to 6ft (180cm) in diameter but no more than 59 lbs (27KG) in weight (including LNBFs, cables, and wind factor).
  
• Installation Guide for this Motor

Specification:
Model H180
Antenna Diameter 1.8M Max.
Dish Weight 27KG Max. (59 Lbs)
Diameter of Mounting pole φ55~72mm
Azimuth Angle 80˚ EAST~ 80˚ WEST (160˚ )
Adjustable Elevation Angle 0˚ ~ 90˚
Declination Angle 0˚ ~ 8˚
Input Voltage 36 VDC
Power Consumption 350mA (Normal) 750mA (Max.)
Rotation Speed 1.8˚ / sec w/1.8M Dish Command Protocol DiSEqC 1.2 Resynchronize Function YES
Goto Position 0 Function YES
Goto X Function N/A

Warranty: 1 year manufacturer's warranty serviced by us.

This motor will work with the following dishes amongst others:

• Fortec Star 180CM C-Band dish
• Note: Two angle iron brackets to attach the dish to motor (like what you see in the picture below) will be required - not included.

CAUTION: If your dish accumulates snow, that will impact the weight factor against the motor and could result in breaking the motor due to excessive weight. Make sure you clean any snow off the dish and have the dish pointed in a way that will allow the snow to slide off.