CCTV analog

[conchman]

I have gotten my Satcruiser operational. However, as to the analog signal for CCTV on Galaxy 3-ku, 12170MHZ horizontal, please tell me how to program. I am getting digital signals off the sat, but when I go to analog channels to program, I get nothing. Please help. Thanks, Jim

[stardust]

After scanning switch off your receiver and restart. (switch off/on with remote control)
Be sure the lnb is set to the right analog input (a or b).
If you are using a mini diseqc switch set the right lnb (mini A or mini B).

[conchman]

Thanks, Stardust. I can see the CCTV channel pop up during the "all scan" & it actually lists the channel(s)--one vert & one horz--in the analog channel listing, but I get no channel when i select it!? I tried turning receiever off & on when the scanning stops & the "press any key to continue" info comes up. Did not work. Anything else? Thanks, Jim

[stardust]

See the channel pop up during the scan is not enough.
You have to go in to the lnb menu and set the mentioned propertys well.

[conchman]

I'm not sure what you mean. In LNB, I set ch number, lnb A (in my cse), correct satellite, universal, polarity. What am i missing? Thanks, Jim

[bill190]

I have had some success playing with the invert setting...

Anyone know what this is for?

[stardust]

It just does that, it inverts the video.
On some c band transponders the vidoe signal is inverted.
You have to inverted it again to make it visable.