MRX900

[yate]

Some one know where to find more information about Microyal MRX900 (configuration, up grades...)

Thanks folks

[hakush]

You can try contacting them for a question..

microyal@telusplanet.net

http://www.microyal.com/contact1.html

What has been your experience with Microyal 900 so far?

I just had one for 3 days. Very easy menus, but not a video sensitive reciver

[yate]

well, frends Im new in the FTA world. I tray to contact Microyal... it was imposible. I only see radio channels no video at all...

Thanks for your help

[yate]

Frends
sorry about my english (Im mexican).

It's ok. Are you sure the video connection between the tv and reciver is good? can you see the menus?
Un saludo para ti :wink:

[hakush]

there must be a button on the remote to switch between radio and tv

[DoTcOm]

I bought one two weeks ago and still cannot get retrieve any picture or signal. Can someone tell me what am I doing. Thanks.

[yate]

Originally Posted by tanjiabdou

It's ok. Are you sure the video connection between the tv and reciver is good? can you see the menus?
Un saludo para ti :wink:

Yes I am sure. In fact I can get muisic...

[yate]

I have the same problem...

Originally Posted by DoTcOm

I bought one two weeks ago and still cannot get retrieve any picture or signal. Can someone tell me what am I doing. Thanks.

[DoTcOm]

Is there a solution for those receiver. I tried everything and still to sign of signal. I email several Microyal comp., and still have no answer. They told to read the manual I did that. Can someone please help. Thank you.

[hakush]

Is it your first time with a dish setup? if so, pointing the dish correctly might take quite some time at first. Otherwise, I do not know whether it is a receiver problem. I had a Microyal 886 (the older model), worked fine for 1 year, then was dead all of a sudden (maybe overheated or something). I will probably not buy another Microyal..
Good luck.

[yate]

What did you mean " not a video sensitive"... ?

"I just had one for 3 days. Very easy menus, but not a video sensitive reciver "

[WyrTwister]

Originally Posted by yate

well, frends Im new in the FTA world. I tray to contact Microyal... it was imposible. I only see radio channels no video at all...

Thanks for your help

What satellite are you pointing the dish at ? If Dish Network or Canadian Bell Express View , , radio is about all you are going to get .

Nothing at all on DTV .

Check out the chanel charts at :

http://www.lyngsat.com/freetv/North-America.html


and

http://www.lyngsat.com/freetv/South-America.html


If you speak Spanish you may find a lot of channels to choose from . But you may need a bigger dish than the 18" DTB dish I am going to try to start out with . Depending on which satellite & where you are located ? Some one please help me out on that .

I have been reading up on this stuff , but have not received my hardware , yet .

Good luck ,
Wyr

[yate]

Well...

I try T5, SATMEX5, GALAXY3R, AMC3, ECOSTAR7 using a 30" parabolic antenna. I Think there is a pointing problem. When I connect de DVB equipment to the antenna that look at "directv para todos" (form Directv 119° W) I see in the diplay: radio channel and encripted video.