firm soft here
http://www.amt.co.kr/
two diferent interface and looks and channel
this Europa r3abemamt12850a
looks like usa model r3aaemamt12850a
this for Middle East r3abemamt12850a
looks like usa model r3aaemamt12850a
You have to follow this steps|
Hyper Terminal Setup
To set your HyperTerminal follow these steps
1. Window 95/98/ME/NT/2000 Click on Start, Programs, Accessories, Communication, HyperTerminal
2. Click on HyperTerminal, select Satcruiser for the connection name
3. At the "connection string" field, click on the ARROW and select COM1, COM2, COM3 or COM4 depending on the serial port you will be using for the download. (Normally COM1 or COM2). It is extremely important to know which port you will be using for downloading the software.
4. For the Connection Parameters select the parameters from the table below.
5. put the Satcruiser in "software upgrade mode"
6. In the HyperTerminal click on "send file"
Hyper Terminal Setup
BPS: 57600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
File Send Protocol: Z MODEM
How to set the Satcruiser in software upgrade mode.
1. Connect the null modem cable between the Satcruiser and the PC.
2. Press the Z key on the keyboard and turn the receiver power on immediately. If you do not see the upgrade menu on the hyper terminal, then turn the unit off, and press SHIFT Z then turn the power on.
3. Select item 1 (software upgrade) from the menu displayed on your HyperTerminal screen.
4. From the HyperTerminal menu, click on Transfer and Send File. Use the BROWSE function to locate the software file name . Select ZMODEM as the type of transfer protocol. Once the file name is in the browse window press OK
5. After clicking on the OK button, a meter will start counting on your HyperTerminal screen. If it does not, check your connection and start again.
6. Wait until the file is completely transferred, then initialize the unit by pressing Menu, System Setting, Initialization OK, OK
8. To view the version number press Menu,
Installation, System Setup, Software Version, Exit.
After that if you can read your reciever go to this web site
http://www.amt.co.kr/
editing program dosent works on this web site
thats why im use Hyper Terminal yo update reciever
You will see soft for Sat cruiser
DSR-301Ace
this files just has diferent interface
this Europa r3abemamt12850a
this for Middle East r3abemamt12850a
After that i download this progam to edit all satelite and chanels because if you upgrade your reciever will be have all
european or midle east satellite and chanals
http://satcruiser.com/PubFiles/hanaro_zl9.exe
im not responsible for any damage on your reciever
i fix may like this :lol:
Linear Mode
