PowerSat PS5 Problem!! HELP!

[usafhk]

Alright guys, I was looking around the menu and touching stuff because I was trying to add some channels. I went to this option where it changed the Frame Rate or something like that. Now everytime I turn it on all I see is the the screen shuddering. Now I cant see the screen, I press the Menu botton but you can only see half the screen and is going crazy. I'm wondering how I can reset this thing or even better fix it!! This is for my parents and thats all they watch.

[teched]

Have you tried changing the setting(s) you changed back to their previous setting?

[usafhk]

Originally Posted by teched

Have you tried changing the setting(s) you changed back to their previous setting?

I cant even see the menu, its going crazy, all I see is the frames and stuff going up. Is there a reset button on the receiver itself?

[bobkat]

What you have done is put the receiver in PAL video mode. You must change it back to NTSC; however this is tricky because you cannot watch the menu screen. Find the manual and look up the remote control steps that you need to follow to change it. You will effectively be working "blind" so you must follow the manual's steps carefully.

kat

[usafhk]

thanks but do you think i can find the manual online? Is it the remote manual or the receiver manual?

[bobkat]

You might find it online. Usually there is only one manual covering the receiver and the remote.

kat

[pmb1010]

you might want to see if you can find a small black & white tv that has RCA video jack input.

I have read a while back that TV will display a PAL signal good enough with a lock - so that you can change it back to NTSC in the menus

[usafhk]

Damn, Thanks guys for everything, ill see what I can do.