Hi everyone! I have some problems with Benjamin DB-6000.
I have installed two satellite dish and connected these LNBFs to DiSEqC switch (My DiSEqC Switch type is 4 to 1. I connected first LNBF to socket which named as LNB-A on this switch and connected second LNBF ot LNB-B socket). I tested with another FTA and everything is normal. But DB-6000 can't control DiSEqC Switch and my device receives signal from first satellite. How can I solve this problem?
That receiver controls DiSEqC switches just fine - I've installed many of them. Check your manual to make sure it is configured to control the switch.
kat
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
I don't have manual. My friend gave me this receiver without manual. I can't delete unwanted channels. bobkat could you give me the instructions about deleting unwanted channels and configurating DiSEqC switch?
I don't have manual. My friend gave me this receiver without manual. I can't delete unwanted channels. bobkat could you give me the instructions about deleting unwanted channels and configurating DiSEqC switch?
Sorry but any manuals I once had are long gone. Benjamin has been discontinued unfortunately. However the menu is pretty self intuitive as I recall - just push buttons until it works - you know - like computers - hit keys until it does what you want it to.
kat
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
I can't delete unwanted channels. bobkat could you give me the instructions about deleting unwanted channels and configurating 
Linear Mode
