Sat Cruiser LNB Configuration

[AUBREY]

Am receiving all FTA on T5 using Lnb Config 10750 but not receiving other satellites. Using Universal 10600-09750 should I be using other numbers. Hope you can help. Thanks

[dtsexpert]

What do you mean by saying "other satellites"?
There are 3 type of Ku lnbf:

Linear : 10750 for satellite such as Tealstar, AMC, Galaxy....

Universal: Low 9750, High 10600 for satellite as Telstar, AMC...plus you can receiver the lower ku band which is used by internation satellite such as Pas9....

Circular: 11250 for DishNetwork/ExpressVu

Michael

Originally Posted by AUBREY

Am receiving all FTA on T5 using Lnb Config 10750 but not receiving other satellites. Using Universal 10600-09750 should I be using other numbers. Hope you can help. Thanks

[AUBREY]

[quote="dtsexpert"]What do you mean by saying "other satellites"?
There are 3 type of Ku lnbf:

Linear : 10750 for satellite such as Tealstar, AMC, Galaxy....

Universal: Low 9750, High 10600 for satellite as Telstar, AMC...plus you can receiver the lower ku band which is used by internation satellite such as Pas9....

Circular: 11250 for DishNetwork/ExpressVu

Michael


Thanks Michael...by other Satellites, I meant P9 etc. I had been getting great FTA signals on Galaxy, Telstar, AMC, Pas9, but inadvertenly, when doing new programing, lost the LNB Configuration settings I had been using. I put 10750 back in and that corrected T5 only, and now receiving those channels but when using Universal Lo.Freq 10600 and Lo.Freq.low 09750, cannot get signals using same TP's as were getting channels before.

[dtsexpert]

As I have stated, you have to set the correct LO for the type of lnbf you have.
Your lnbf is standard ku linear, LO has to be set as 10750.
FYI: PAS9 uses low and high bands. Using standart Ku, you only get the high one which is SkyMexico which most of them are encrypted anyways.
There are other FTA on PAS9 is low ku band (Cubavision....), in order to view these channels, you must use a universal ku lnbf.
Michael

[quote="AUBREY"]

Originally Posted by dtsexpert

What do you mean by saying "other satellites"?
There are 3 type of Ku lnbf:

Linear : 10750 for satellite such as Tealstar, AMC, Galaxy....

Universal: Low 9750, High 10600 for satellite as Telstar, AMC...plus you can receiver the lower ku band which is used by internation satellite such as Pas9....

Circular: 11250 for DishNetwork/ExpressVu

Michael


Thanks Michael...by other Satellites, I meant P9 etc. I had been getting great FTA signals on Galaxy, Telstar, AMC, Pas9, but inadvertenly, when doing new programing, lost the LNB Configuration settings I had been using. I put 10750 back in and that corrected T5 only, and now receiving those channels but when using Universal Lo.Freq 10600 and Lo.Freq.low 09750, cannot get signals using same TP's as were getting channels before.

[AUBREY]

Thanks for your help.

Have things working again with your info.