Please Help, I Factory Default.

[quangnguyen2003]

Please help me. This site did not help me. http://sadoun.com/Sat/Products/BEC/Factory-default.htm

i try everything. Nothing works. My controller remote does not have UHF button. Someone please help me i press factory default. I live in georgia atlanta. thank yu

[Sadoun]

HI

Does your remote control have an FP or PF button?? Click it then click the right arrow button until the screen stops rolling. Good luck.

[quangnguyen2003]

im sorry, i dont have that button. my control dont have button FP PF. Can you please help me?

[Sadoun]

What BEC model receiver do you have??

[quangnguyen2003]

thank you for reply.

i have BEC DB-6600+ For Telstar 5.

Thank you

[Sadoun]

Ok. Your remote must have a UHF button on it. If it doesn't, you might want to replace the remote or borrow a remote from a friend to get your issue resolved. We sell these remotes at http://sadoun.com/Sat/Products/BEC/BEC-DB-6600-CI.htm

[quangnguyen2003]

Ok, i will try to buy one at the store i buy the satellite recieve from. Thank you.

[bobkat]

Hi Quang:

Here is the procedure for the BEC 6600 + series to stop the picture from rolling (ie: set it back to NTSC mode rather than PAL - factory default sets it to PAL -- its a European thing... :roll: )

Using the remote control do the following:

1) press MENU (looks like a little book icon - just below "Arrow Left" key)

2) press "Arrow Down" 5 times

3) press "OK" (key in the middle of the arrow keys)

4) press "Arrow Down" key 8 times

5) press "Arrow Right" key until picture is stable - TV Type is now set to NTSC

-- if this doesn't work, repeat the above procedure but press "Arrow Down" key 7 times rather than 8 times in step (4)

kat