true south setup dont get

[sonic2631]

HI, I'm a new baby here. I have the motor SG2100, and 85cm dish size. I tried to get all sat with my QPH-031, but I got nothing except 97W only. I don't know what I did wrong? Can someone help me out? Here is my info
Your LocationSatellite DataDish Setup DataLatitude: 29.9601°
Longitude: -95.4616°
Name: Moteck SG2100
Distance: 36781km
Motor Latitude: 30.0°
Declination Angle: 5.0°
Dish Elevation: 25°
Elevation: 55.1°
Azimuth (true): 180.0°
Azimuth (mag.): 176.4°


Right now, my dish is at 25, and my motor latitude is 30

[Jim-S]

You say your are getting 97W are you getting a picture. What kind of receiver do you have.
Is 97W your most south satellite.
Are you using USALS to move your dish.
Is your dish moving.
What is your zip code.
To see your most south satellite go to Satellite Finder / Dish Pointing Calculator with Google Maps | DishPointer.com
You must have a switch at the dish, bypass it until you have the system working.
All satellites in the antenna setup must be the same on the linear side of the LNB.
The LNB is standard setting is 10750 for Linear and 11250 for Circular.
ALSO read post #6 above and use your settings..........
Good luck
See LyngSat - Lyngemark Satellite for satellite listings

[sonic2631]

Thanks for your reply, Yes, I just got only 97w with picture, and I couldn't get the others sat. I'm using Pansat 2500A converted to PUFF. My Zip code is 77067. I'm living in Houston, TX. My dish is moving both sides really good, but I don't know how to adjust to the right degree to get others Sat. Can you help me out or give me any idea. Thanks alot

[Jim-S]

Thanks for your reply, Yes, I just got only 97w with picture, and I couldn't get the others sat. I'm using Pansat 2500A converted to PUFF. My Zip code is 77067. I'm living in Houston, TX. My dish is moving both sides really good, but I don't know how to adjust to the right degree to get others Sat. Can you help me out or give me any idea. Thanks alot

I don't know anything about your receiver, but there must be a antenna setup and a motorized setup menu in your receiver. Make sure they are correct. I would setup your system using USALS.
You might want to research the PUFF option on the internet, there could be problem with it.

[sonic2631]

Thank Jim-S, I will try and see how my dish and my motor work. One more thing, Can you tell me which sat is using Linear and which sat is using Circular? Maybe, it will help me to figure out and check my dish and motor.

[Jim-S]

Thank Jim-S, I will try and see how my dish and my motor work. One more thing, Can you tell me which sat is using Linear and which sat is using Circular? Maybe, it will help me to figure out and check my dish and motor.

North & South America - LyngSat
I can't list them all but you can use this site. Echostar, Directv are circular...you will see from list what is and what ain't.