New member need expert's help for SG2100 system installation

[techno 2]

My motorized system did not work, Please help me
window.google_render_ad();

Hello there to all,

I just joined this wonderful forum and it looks like I am going to get the best help over here.

1) I installed the motorized system "SG2100, Invacom quad & 33" dish, connected to cables one from C and another from L to 4x1 diseqc switch, to the motor and from motor to receiver CS 7000.
2) I did the install last week using a good pole and inclinometer, good location that was working for my old dish.
3) I pointed to real south using good compass and according to the numbers calculated for my Latitude which happened to be : Dish elevation: 24 (this was bottom of the scale), Declination Angle (also was bottom of the scale) Azimuth: 193.2
4) I got signal 80% with Zero quality, The motor moves back & forth and Goes to reference with no problem.
5) I tried moving the motor west and east but no quality changes. I am afraid I am not selecting the right LNB type and frequency as I have selected Legacy Quad 1 or 2 with frequency 11250.

Did I use the right procedure??, what LNB type and frequency I should select from the Receiver's list "single, universal, quad single, quad twin etc..." ??

I feel so bad and wish I have stayed with my fixed dish for 110 & 119. But I do have faith in the forum help and need your support at this point. Your help means a lot to me and hope we can get it to work.

Thanks

[Jim-S]

My motorized system did not work, Please help me
window.google_render_ad();

Hello there to all,

I just joined this wonderful forum and it looks like I am going to get the best help over here.

1) I installed the motorized system "SG2100, Invacom quad & 33" dish, connected to cables one from C and another from L to 4x1 diseqc switch, to the motor and from motor to receiver CS 7000.
2) I did the install last week using a good pole and inclinometer, good location that was working for my old dish.
3) I pointed to real south using good compass and according to the numbers calculated for my Latitude which happened to be : Dish elevation: 24 (this was bottom of the scale), Declination Angle (also was bottom of the scale) Azimuth: 193.2
4) I got signal 80% with Zero quality, The motor moves back & forth and Goes to reference with no problem.
5) I tried moving the motor west and east but no quality changes. I am afraid I am not selecting the right LNB type and frequency as I have selected Legacy Quad 1 or 2 with frequency 11250.

Did I use the right procedure??, what LNB type and frequency I should select from the Receiver's list "single, universal, quad single, quad twin etc..." ??

I feel so bad and wish I have stayed with my fixed dish for 110 & 119. But I do have faith in the forum help and need your support at this point. Your help means a lot to me and hope we can get it to work.

Thanks

If you have the Invacom QPH-031....you would chose Standard, Linear 10750 and Circular 11250.............
Jim

[SatLuv]

Watch the video here:
How to install an HH-Mount Motor? Applies to DG240-SM3D22-STABHH100-HH120-Motech-SG2100