H180

[Jagee]

Will i bought the Vbox as suggjested to me,What type of wires should i get for the installation of the saensors and the motor.Im goingto need around 125footAlso i don't understand the blue prints on this motor that came with it,On your left side of the motor you have 2big hex screws 1 small and 2 medium on the other side of the motor you have 2 medium and 1 small hex screw.What wire goes were. One other question due i setup in pansat for movement or off and use my vbox alone or bothThank you

[rainman]

you can use it either way with the pansat or the v box as a stand alone your choice. the cables you need is called acuator cables check some c band sites to see where you can buy it from. the 2 big wires will go to the motor and 2 smaller wire will go to the sensor.

[Jagee]

Which side is for what if your looking at the back of the dish,Gesh i just found out NOW ialso need a DARN Adapter before i can put this thing on the dish.This is notfair I looked on saudon site and found nothing saying that before buying this darn dish and motor,what a RIP off Im calling them.Im sorry wrong site to be gripping

[rainman]

check this out and see if it helps.the m1 and m2 are your motor wires.

[Jagee]

All the booklet would've had to say is open up the half side of the motor to wire it up.Now that i opened it up.

[rainman]

glad you got it figured out.