motor setup annoying

[DruzeTito]

I am trying to track the arc correctly. I can usually track my satellites from true south to galaxy 10R good. But when I turn to PAS 9, cubavision tp has no good quality. I can get quality either by moving my whole motor and or the dish elevation but this in turn messes up something else!

Another scenario is when I am at for example IA 5, TP 11991, I can peak the quality to 95 but turning to G10R on The Tube, quality is gone or very very low. I can't pinpoint perfect tracking. My calculated dish elevation for SG2100 is 25.33 and true south 184 on the compass. If only I knew when my dish elevation is perfect, then I have only one variable and thats the mount..

When I track IA 5 to G10R good, the tp 11991 IA5 can get to 60-65 quality and The Tube on g10R is 50. It simply amazes me if I can get 90-95 by adusting the d.e., but not without messing up another satellite.

[DruzeTito]

I have also seen the good stuff in http://www.geo-orbit.org/sizepgs/tun...l#anchor801578

Which part of the setup is declination adjustment? Dish elevation or motor scale?