Returning HH120 to zero degrees with Fortec Receiver

skewray · #1 (**permalink**) 01-09-2005, 03:05 PM

I have a Fortec Ultra and an HH120 motor. I need to return it to zero degrees. How do I do that? Thanks for any tips.

Regards,

Brian

ZeroBeat · #2 (**permalink**) 01-09-2005, 06:11 PM

do you mean the reference position?

skewray · #3 (**permalink**) 01-09-2005, 08:01 PM

The HH120 has a zero-degree mark at the center of travel. I need to re-park it there so I can try to re-align the dish. The Fortec manual is not helpful.

Brian

pmb1010 · #4 (**permalink**) 01-09-2005, 08:29 PM

Try this:

Pick a satellite, change positioning to Disqc 1.2
Then pick "go to reference".

I think that is also on the USALS menus, but I've had it not work reliably but it might be my motor, not the receiver...

skewray · #5 (**permalink**) 01-09-2005, 09:40 PM

Thanks. I'll give it a shot next time it isn't raining 10 inches per day here...