HH installation question

[mac21]

I am using a Fortec Star LNB model FSKU-V (Universal Single LNBF) With a 30"Fortec Offset Dish a PANSAT 2500a and a PansatPM900 motor my questions are when pointing to my true south Sat which is Intelsat5 what setting should I put the LNB to Standard or Universal 1 or Universal 2?And should I used 1.2 or USALS to control the motor?And are there anyother setting I should change?

[Admin]

USe Universal 1 for your LNBF. Use USALS for your positioner settings.

[mac21]

After messing around w/the settings from your reply and others. I went with standard and then freq to 10600 w/the 22k switches turned on and what do you know my level came thru to 90 and the signal the bottom bar was at 30 to 35 I am trying to fine tune on Intelsat 5 but the highest signal I get is 35 what other setting do I have to change to get the bottom meter to a higher level are there diffrent freq. i should try or just manually move the dish?

Thanks again your help is so APPRICIATED