Pansat 900 motor and Fortec 30"Dish

[mac21]

I have 2 question hopefully i can get answered 1)Do I need to used a diseqc switch for this setup with a Pansat 2500a a Pansat motor and a 30" fortec dish? 2)How do I set up my dish and motor for the elevation portion do i need to align the elevation on both the dish and the motor?or do i just level out the dish elevation and worry about the motor elevation only?Any help would be appriciated thanks

[pmb1010]

I have 2 question hopefully i can get answered 1)Do I need to used a diseqc switch for this setup with a Pansat 2500a a Pansat motor and a 30" fortec dish? 2)How do I set up my dish and motor for the elevation portion do i need to align the elevation on both the dish and the motor?or do i just level out the dish elevation and worry about the motor elevation only?Any help would be appriciated thanks

- you only need a diseqc switch if you have 2 or more LNB's to hook up.
These LNB's can be on the same dish, or different dishes.
If you have a motor and 1 lnb the switch is not needed.

- follow the instructions for SM312D for setting up your Pansat 900:
http://www.sadoun.com/Sat/Products/S...TOR_SM3D12.htm