Winegard dish adapter for Stab HH120.

nupdyxa · #1 (**permalink**) 03-01-2003, 01:11 PM

Hi,
Bought my Stab HH120 in Europe, trying to use it with my 1m Winegard Dish. Az-El Mount of the dish accepts a pole in the range of 57-66mm and thus larger than the Stab outer diameter (54mm). I am in need of an adapter that would go from 54mm to 62mm. The Sadoun's site offers adapter 54-76mm, which would not work 'cause it's too big.
I would appreciate any advise of how I can have my Winegard dish fit on the Stab HH120.
Thanks.

Sadoun · #2 (**permalink**) 03-02-2003, 12:16 AM

Try using a PVC tubing slit in two halves. It could also work. Just an idea. :lol:

habib · #3 (**permalink**) 07-27-2003, 02:01 PM

Quote:

Originally Posted by Sadoun

Try using a PVC tubing slit in two halves. It could also work. Just an idea. :lol:

Thanks for this recommendation! The method works great for an HH100 and a Primestar Dish mount.

cbnd · #4 (**permalink**) 12-24-2003, 05:31 PM

I see these are out of stock:

http://www.sadoun.com/Sat/Products/STAB/Adapter.htm

but what's the idea? I may try to get some made. Since there's two of them, would I put one of them towards the bottom of the Stab shaft, and one towards the top?

Anyone that has used them, please let me know. Or the seller, since he sells or used to sell them.

Thank you very much!

Sadoun · #5 (**permalink**) 12-24-2003, 10:29 PM

cbnd

Yes that is the idea. If I find a picture I will post it here :-)

cbnd · #6 (**permalink**) 12-25-2003, 05:44 PM

Quote:

Originally Posted by Sadoun

cbnd

Yes that is the idea. If I find a picture I will post it here :-)

Sadoun,

Thank you. I will see if I can get something working. I am also looking to buy the narrower mount made for the 1-m Channel Master dish. That one is 2 3/8" , considerably narrowing the gap, and maybe I can use PVC like you suggested.

Thanks again!