will a Motech SG1200 HH motor work for what I have ??

[xcaret]

I'm new to this and just got a 30" dish and set it up ,I am locked onto telstar5 and working good ..I have ideas to sell FTA systems and install them, I am wondering about advertising them from my van with the dish mounted on the roof ..( I did this with the now outlawed in Canada DTV & Dishnet ) Everytime I park and set up I would point the dish ,and would like to just push a button to go to different satellites as I need to in order to show the customer the channels in his language..
The advertisement in the site doesnt say if you get everything you need ..I just have the regular style bolt into one position dish ..does the HH come with a bracket that bolts to the dish ,then bolts to the motor with u bolts,then the motor bolts to the mast with u bolts ?? How is this activated ? Once its set up pointing south do I need a remote or switch of somekind to activate it ? I guess I should have first asked if anyone knows of a site that would give detailed information ...
Thanks.

[Sadoun]

does the HH come with a bracket that bolts to the dish ,then bolts to the motor with u bolts,then the motor bolts to the mast with u bolts ?? How is this activated ? Once its set up pointing south do I need a remote or switch of somekind to activate it ?

The HH comes with U bolts to attach to the mast. It doesn't come with U bolts for your dish. Your dish must have U bolts to attach to the HH motor.

Motech HH motor does not support USALS. For what you want to do, I would highly recommend the STAB HH100 motor instead. A higher quality motor with USALS capabilities. With USALS, all you have to do is position your dish/motor assembly to true South, then use your USALS compatible receiver to position the dish. In the receiver you will need to enter your location's longitude and latitude. The receiver will send a signal to the motor to find the satellite automatically on its own.

See installation guidelines http://sadoun.com/Sat/Installation/H...stallation.htm

The motor is activated by the digital receiver using the receiver's remote. The motor gets its power through the same coaxial cable that goes to the LNBF.

[xcaret]

Many thanks Sandoun, You gave me a lot of information ,and answered some questions I forgot to ask..

[Sadoun]

Glad you asked... :lol: