HH100 Motor Problem

[hockeyfreak]

I need some help I am installing a 75cm dish with an HH100 motor and an Ariza TP1000. My long is 125 W and I have no problem locking onto G10R at 123 W. When I attempt to hook up to any other satellite the dish goes hard over to the East stop. I have tried everything I can think of and if I do a factory reset it fixes nothing. Also when I change TP'S on any satellite it moves wherever it feels like. Could it be a problem with my motor, I'm assuming that the motor only moves when it is told to. Are there preset positions inside the motor, I thought the receiver told the motor when and how far to move. Anyway I'm thinking I could do a software upload I'm not really sure how or where to get it but am willing to try anything. If you do an upload does it erase what you presently have or just add/change it. I think it needs an initialization to straighten it out or maybe the garbage can. How much for a good receiver with USALs.

[bobkat]

See my reply in the "Other Receivers" forum.

kat

[Admin]

I am not familiar with the Ariza. However, you might have to set the limits first before using the HH motor. Try that.

One of the best receivers I found for controlling an HH motor with USALS is the Fortec Star 786 series. Starting at $155 per receiver, you get your money's worth.

[bobkat]

Originally Posted by Admin

you might have to set the limits first before using the HH motor. Try that.

LOL !! Is there any echo in here?? :lol: :lol:

kat