LNBF Adjustment with HH Motor Mount

dzenizo · #1 (**permalink**) 11-08-2002, 03:52 PM

I know that for a specific satellite, you should adjust the LNB Tilt, so the vertical and horizontal polarizd signals are received at maximum peak.

What's the procedure for setting the LNBF when mounting a dish on a HH Motor?

dzenizo · #2 (**permalink**) 11-08-2002, 04:14 PM

Already answered on the Installation Support forum.

Tilt should be set to Zero:

Bill190 posted:

"Also if you have a HH mount positioner for your dish which moves it to different satellites, you need to set the LNBF tilt to 0. This would be straight up and down. The HH mount positioner will tilt the entire dish and LNBF with it as it moves east or west."