2 recievers 1 dish

JRAH · #1 (**permalink**) 11-04-2006, 07:30 PM

thanks rainman

both recievers (xsat 410 have loop threws) but was what aboght the power going to the lnb does the loop threw hav power and would you go from the loop threw to the sat in on the other reciever and does ent the sat in on the the other reciever hav power on so would you not have power feeding back into the other recievers loop out would this not casue problems to the reciever at this time i cant find a multi out put lnbf for c band
thanks

rainman · #2 (**permalink**) 11-04-2006, 07:56 PM

Quote:

Originally Posted by JRAH

thanks rainman

both recievers (xsat 410 have loop threws) but was what aboght the power going to the lnb does the loop threw hav power and would you go from the loop threw to the sat in on the other reciever and does ent the sat in on the the other reciever hav power on so would you not have power feeding back into the other recievers loop out would this not casue problems to the reciever at this time i cant find a multi out put lnbf for c band
thanks

ok what you want to do is use a splitter with dc block on one port. still only one receiver will be able to control the lnbf. so on the second receiver you will only be able to receive whatever polarity the master receiver is set at.

JRAH · #3 (**permalink**) 11-04-2006, 10:21 PM

i would like to know how to hook up 2 recievers with 1 dish and a 1 output

lnbf ?

what abought the power coming from both recievers will thi be aproblem?

thanks in advance

rainman · #4 (**permalink**) 11-04-2006, 11:31 PM

if you receiver has a loop through you could use this. one receiver would control the lnb the other would just be along for the ride in other word what ever polarity you are watching on one receiver will be the polarity you receive on the other receiver. would be the best to get a dual Lnbf.

Reinhold · #5 (**permalink**) 11-05-2006, 07:30 AM

I use the loopthrue and it lets me control the moter from both receivers.
If the master receiver is being used it controls the moter,but when it is off I can use the second receiver to control.
You can not use both at the same time.
Reinhold.

boroda1 · #6 (**permalink**) 11-06-2006, 03:14 PM

I use A/B switch, and restricted to use one receiver at a time with my dish

elgemcdlf · #7 (**permalink**) 11-06-2006, 03:28 PM

Quote:

Originally Posted by boroda1

I use A/B switch, and restricted to use one receiver at a time with my dish

I believe if one took the time to think it out you could use an A/B switch with splitters and loop thru to create a dual reversing master/slave relationship with 2 receivers.