Clear steps for the installation plzzzzzzzzzzzz

digipowergurl · #1 (**permalink**) 10-08-2006, 01:28 PM

hi,
i need some clearly help to do the steps for the installation. If you know send me an email and i will be soooooooooooooo happy!

kelly

rainman · #2 (**permalink**) 10-08-2006, 07:28 PM

welcome to the forum kelly. send some info on what you are trying to install. your location zip code. type of dish, size,wheither it is a motorize system or stationary system,also type of receiver.with a little info we can give you the help that you need.

digipowergurl · #3 (**permalink**) 10-09-2006, 12:42 PM

hi,
i got a motorized system (DiSEqC 1.2 Motorized H-H Motor), for dish up 1.2 M 9120cm max-dish). Goto X function, we living in canada. in quebec (418). we have a coolsat 5000 receiver. First step, we need a specific frequency

? However we have with our satellite, a range between 10-12(LNB). We tried to find a quality but it was just around 2%. After, we tried to find some satellites and when we found it with a quality around 66%(Anik 1 ,111,1w) we didn`t have any channels it was a black screen(scrambled channels). All channels were channels which we need to pay

.?? is it normal!!?? After, we learnt that we need a specific software application to use our channels. But how to find this software and how to use it???

thank you so much for your help!!!

kelly

elgemcdlf · #4 (**permalink**) 10-09-2006, 12:48 PM

First you do not require any "special" software. The software spoke of is illegal and constitutes piracy. Second if you go to www.sadoun.com and on the left side of the page is a link to Technical support. In there you will find a link to motorized tips. Installation instructs are complete and easy to follow.

digipowergurl · #5 (**permalink**) 10-09-2006, 12:57 PM

ok thanks but when i go on the left side which category is it because i can't found something like technical support!!???

kelly

elgemcdlf · #6 (**permalink**) 10-09-2006, 12:58 PM

Sorry it is on the right side

http://www.sadoun.com/Sat/Installati...stallation.htm

rainman · #7 (**permalink**) 10-09-2006, 01:13 PM

Quote:

Originally Posted by digipowergurl

hi,
i got a motorized system (DiSEqC 1.2 Motorized H-H Motor), for dish up 1.2 M. Goto X function, we living in canada. in quebec (418). we have a coolsat 5000 receiver. First step, we need a specific frequency

? However we have with our satellite, a range between 10-12(LNB). We tried to find a quality but it was just around 2%. After, we tried to find some satellites and when we found it with a quality around 66%(Anik 1 ,111,1w) we didn`t have any channels it was a black screen(scrambled channels). All channels were channels which we need to pay

.?? is it normal!!?? After, we learnt that we need a specific software application to use our channels. But how to find this software and how to use it???

thank you so much for your help!!!

kelly

I would check www.lyngsat.com
for freq and what you can receive fta they are listed dvb with a f for the free channels also are colored code tan is free to air.

William Eng · #8 (**permalink**) 10-09-2006, 02:54 PM

I don't know if this is true or not (reliablity of material posted on the net comes into question). I came across some information that people located in Canada are allowed to hack scrambled satellite signals since the satellite companies don't have a license to operate there. Anyway, I recommend you ask a lawyer about this before you do something illegal.

elgemcdlf · #9 (**permalink**) 10-09-2006, 03:19 PM

Quote:

Originally Posted by William Eng

I don't know if this is true or not (reliablity of material posted on the net comes into question). I came across some information that people located in Canada are allowed to hack scrambled satellite signals since the satellite companies don't have a license to operate there. Anyway, I recommend you ask a lawyer about this before you do something illegal.

Very interesting concept.

digipowergurl · #10 (**permalink**) 10-09-2006, 08:48 PM

i will wait!!!!

kelly

rainman · #11 (**permalink**) 10-09-2006, 09:01 PM

Quote:

Originally Posted by digipowergurl

i will wait!!!!

kelly

what type of program are you trying to receive nothing FTA on f2 at 111.1 even if it was you would need a digicipher unit and the coolsat don't do digicipher.

vj9999 · #12 (**permalink**) 10-09-2006, 09:39 PM

I'm locking this thread. No matter if you are in Canada or US, hacking talk is not allowed here.

bobkat · #13 (**permalink**) 10-10-2006, 05:34 PM

Quote:

Originally Posted by William Eng

I don't know if this is true or not (reliablity of material posted on the net comes into question). I came across some information that people located in Canada are allowed to hack scrambled satellite signals since the satellite companies don't have a license to operate there. Anyway, I recommend you ask a lawyer about this before you do something illegal.

Actually it is the complete opposite. The laws in Canada were vague concerning "grey market" satellite systems like DirecTV and DishNetwork and what you posted above was more or less the "unwritten law" until April 2002. The Supreme Court of Canada ruled that it is now a criminal offense to "decrypt any foreign satellite signal" and the Radio Communications Act was amended accordingly. This had far reaching ramifications. For example it would now be a crime for U.S. residents to watch their DirecTV or DishNetwork system while vacationing in Canada -- even though they are paying subscribers and wouldn't know the first thing about hacking. This means they could not park their RV and set out their portable satellite dish; it means they could not watch DirecTV or DishNetwork while spending the summers at their cottage or cabin in Canada. How far the police would push it is arguable...

kat