Multi Dish coax routing

[elgemcdlf]

Ok The Winegard is coming off the roof and going on a pole in the back 40. Also going in is a dedicated 8.5' mesh dish with a circular C Band lnbf for 40.5. These two are pretty much inline with my primary 4DTV dish going west to east with the Winegard in the center. Ok have a visual? Now to my question

How does running the coax from the circular C Band to the center dish and splitting the C and Ku lines off the 4DTV dish and running a leg of each to the center dish. Run each line into a port on a 4 port DiSeqC mounted between the motor of the Winegard and the lnbf.

This would give me one line coming into the house for the FTA receiver with switchability for the 4 lnb/lnbfs along with my feed lines for the 922. Having burned out a DiSeqC placing it between the motor and receiver and the Ku lnbf on the Winegard is a UNI so 22Mhz is out I am in search of a way to get all this into the receiver without switching coax for every change in channel. I suppose I could just dedicate receivers for each but trying to avoid that also.

Any words of wisdom from the masters?

[rainman]

you should be able to do it with 2 splitters comming off of the 4 dtv dish feed 2 lines from 4 dtv dish to disqec port 1and 2 circular c band to port 3 and universal lnbf to port 4. you should use dc blocking that only alows power through 1 side of the splitter to dsr 922 receiver.